![]() Configure static IPv6 routes through these tunnel interfaces. ![]() Enable IPv6 in the “host” mode on the tunnel interfaces.The following configuration steps are required: (Note that this is NOT a 6in4 tunnel! It is simply a forwarding of IPv6 packets through a common IPsec site-to-site tunnel.) Tunneling If so, the steps to tunnel IPv6 through this VPN tunnel are quite easy. I assume that there is already a VPN connection between two Juniper ScreenOS firewalls in place. Here is how I did it with some Juniper SSG firewalls: ![]() For example, if the main office has a native IPv6 connection to the Internet, as well as VPN connections to its remote offices, it is easy to bring IPv6 subnets to these stations. ![]() However, another method that is not often explained is to tunnel the IPv6 packets through a VPN connection. Even other tunneling methods such as Teredo or SixXS are found on different literatures. The most common transition method for IPv6 (that is: how to enable IPv6 on a network that does not have a native IPv6 connection to the Internet) is a “6in4″ tunnel.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |